|
Post by Andrea IU4APC on Nov 9, 2014 9:02:52 GMT
Hi everyone, Finally I patched all the bugs and made some slight change to make everything look and work better. I just uploaded the new update to the Google Store and should be available in a very few hours. A complete list of all the new features can be found here: kx3companion.com/2014/11/05/kx3-companion-update-in-beta-testing/I’m sure that you’ll like the new version. None of the new features will be available in the FREE version. Remember that this is a major update and that means that you need to uninstall the previous version and install the new one. Please send me comments and suggestions (and bug reporting if any!). Have fun with it! 72/73, Andrea IU4APC
|
|
|
Post by codeman on Nov 14, 2014 20:06:07 GMT
I just downloaded and installed. The program indicates that I am connected to the KX3 but there is nothing in the RX window and the freq is not indicated, then it simply froze up and would not respond in any way even after closing and opening again several times. I just got a refund. I'm using a Galaxy Tab 3 8.0 gold.
73 Steve
|
|
|
Post by Andrea IU4APC on Nov 15, 2014 10:51:15 GMT
Hi Steve, are you sure that the baudrate is the same between the KX3 and the app. The app default is 38400 bps and so it should be in the KX3 setting as well. This is the most common problem but there may be others. Let me know. 72/73, Andrea
|
|
|
Post by Andrea IU4APC on Nov 15, 2014 10:51:27 GMT
Hi Steve, are you sure that the baudrate is the same between the KX3 and the app. The app default is 38400 bps and so it should be in the KX3 setting as well. This is the most common problem but there may be others. Let me know. 72/73, Andrea
|
|
|
Post by codeman on Nov 15, 2014 14:06:15 GMT
Yep. That was the first thing I checked, then tried the 200 and 300 ms change. Still total freeze up. I have an outboard Hardrock 50 amp hooked up to ACC1 and ACC2. It is set at 19200 bd as well, so I set all at 19200 but still no joy.
72/73 Steve, W1SFR
|
|
|
Post by Andrea IU4APC on Nov 16, 2014 9:24:36 GMT
OK then it's PA MODE. It has to be OFF. Actually the app has problems with PA MODE ON as it sends a loooot of commands via serial. I hope to find a way to filter them all out but actually I don't have any PA to use for testing and that makes difficutl to find out what's causing problems. Try with PA MODE OFF and this probably solves.
72/73, Andrea IU4APC
|
|
|
Post by codeman on Nov 16, 2014 16:01:32 GMT
PA is off. Should Mic bias be on or off? Are there other settings on the radio that need changing?
72, Steve, W1SFR
|
|
|
Post by Andrea IU4APC on Nov 17, 2014 7:21:28 GMT
Hi Steve, the mic settings don't have any impact on that. Can you try another OTG cable and see if it depends on it? 72/73, Andrea IU4APC
|
|