wk2s
New Member
Posts: 2
|
Post by wk2s on Jan 15, 2015 20:19:45 GMT
I am using the latest version of KX3 Companion. Connected to KX3 using Piglet. Phone is a Moto G, Android 4.4.4.
Running SWR Meter, KX3 set to 10.120 MHz. Step distance 10 kHz. Touch RUN.
KX3 steps 10.100, 10.110, 10.120, 10.130, stops at 10.140.
Display shows red bar labeled 10.100, red bar labeled 10.110, red bar labeled 10.120 rest blank. RUN is still dimmed.
Frequency shows the correct 10.140000 and is active, if I change the KX3 the KX3 Companion follows, but RUN remains dim.
Only way to get back is force shutdown.
SWR Meter polling time left at 1000.
What am I doing wrong?
|
|
|
Post by Andrea IU4APC on Jan 16, 2015 7:32:51 GMT
Hi, unfortunately the SWR Meter is not fully stable and in some conditions it may not work properly. Did you try without the Piglet, by using the USB Serial cable? But it's in the plans to do a complete rewrite of the SWM meter procedure so to make it definitely stable on all devices and conditions. Thanks for reporting and let me know if using the USB cable solves. This may be a clue in solving the issue. 72/73 Andrea IU4APC
|
|
wk2s
New Member
Posts: 2
|
Post by wk2s on Jan 16, 2015 20:14:53 GMT
Ran same experiment using USB serial cable. Exactly the same result :-( btw, red and green leds on USB flashing away.
|
|
|
Post by Andrea IU4APC on Jan 18, 2015 16:29:20 GMT
Thanks for testing. Unfortunately as I told you, I probably have to rewrite the code to make it more stable. I'm using a sort of trick to make this things works and sometimes that trick doesn't work as it should. 72/73 Andrea IU4APC
|
|
|
Post by Ellproppy on Sept 26, 2019 12:11:51 GMT
Sildenafil Mastercard <a href=http://bestviaonline.com>viagra online prescription</a> Amoxicillin And Yeast Infection
|
|