ve7hj
New Member
Posts: 2 
|
Post by ve7hj on Nov 19, 2014 2:32:18 GMT
I have the samsung Tab II I hocked up the radio and tablet as described. When I turn in the KX3 companion I get a message No KX3 Detected. I set the baud rate and
confirmed my cable is work with the Tab and KX3 Factory cable.
Not sure what to do now.
James
|
|
|
|
Post by Andrea IU4APC on Nov 19, 2014 8:27:21 GMT
Hi James,
can you see the red and green leds flashing in the KXUSB cable? Or just green?
72/73 Andrea IU4APC
|
|
ve7hj
New Member
Posts: 2
|
Post by ve7hj on Jan 5, 2015 6:57:04 GMT
Andrea
thank you for all your help educating me on how to use your WSPR app.
such fun and a great way to see how the propagation is working.
73, VE7HJ
|
|
|
|
Post by Andrea IU4APC on Jan 5, 2015 11:16:57 GMT
Thanks to you James.
We are all sharing knowledge and I learned a lot in the past two years.
WSPR is great for learning propagation and testing setups (particularly antennas).
I actually have a process listening on 20m band (my preferred band for now) to check how propagation behaves during the day.
Enjoy!
72/73 Andrea IU4APC
|
|
|
|
Post by Horst on May 9, 2015 21:08:03 GMT
Hi,
I am using a Samsung tab sm-t110 and get the Message "no KX3 detected".
OTG Cable and KX3 Cable Works well with a Windows Tab
I set the Baud rate to 9600. Are There any Other Setting?
73 de Horst
|
|
|
|
Post by Andrea IU4APC on May 12, 2015 14:26:56 GMT
Hi Horst,
the baudrate should be the same between the app and the KX3.
By default the app is set to 38400 bps.
Make sure they are both using the same speed.
72/73 Andrea IU4APC
|
|
